Touch Color Screen Reverse Osmosis Control System RO System Controller with sensors RO-8100
ROS-8100 touch color screen reverse osmosis control system is a multi-function control system with combination of four-wire resistive type touch screen with reverse osmosis process control and online conductivity monitor, it is mainly used for the system control and water quality monitor and control of reverse osmosis system.
The instrument adopts 7-inch (standard version) or 10-inch touch screen (optional version) and 800*480 resolution to realize human-computer information interaction with rich and dynamic display effects.
PLC control and conductivity transmitter acquisition circuit;
Adopt the latest high-speed MCU computer processing system in the United States, real-time control of external IO input and relay output, project design focuses on the system's high stability, high reliability, anti-interference, the characteristics of full digital operation.
Main Technical Specification
For Single Stage Reverse Osmosis System
Collection point of input signal
•Water level of source water tank, this is for checking with or without water.(pipe water supply could be treated as Non-water pressure switch)
•Low pressure pump protection
•High pressure pump protection
•Low pressure switch(before the high pressure pump)
•High pressure switch(after the high pressure pump)
•Low level of pure water tank
•High level of pure water tank
•Communicate switch of pre-treatment; (system standby when pre-treatment working)
Note: High and low level of pure water tank, such as the duckbill
switch need to install two switches, two switches directly
connected to the high and low liquid level end; if the float switch is used, the high and low liquid level two wires are wired together.
Conductivity measurement
Controlling point of output
•Source water pump
•High pressure pump
•Dosing pump
•Inlet valve
•Outlet valve
•Flush valve
•Over-limit discharge valve of produced water conductivity
•Alarm relay (can connect with audible and visual alarm)
Note: Solenoid valve requires AC 220V power supply
Other parametersproduct detail