JIRS Ion selective electrode Nitrate Sulfur fluoride calcium chlorine meter
Ion Controller
• LCD display with backlight, English operation interface.
• Technical parameters can be set with buttons on site.
• High stability, high accuracy.
• Multiple output (3 relays, 4-20mA, RS485).
• Super anti-interference design can be for strong interference with field operations and anti-electromagnetic interference.
• Built-in memory chip ensures that the parameters and calibrator data are not lost when shut down or off normally.
• LCD display with backlight, English operation interface.
• Technical parameters can be set with buttons on site.
• High stability, high accuracy.
• Multiple output (3 relays, 4-20mA, RS485).
• Super anti-interference design can be for strong interference with field operations and anti-electromagnetic interference.
• Built-in memory chip ensures that the parameters and calibrator data are not lost when shut down or off normally.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Technical parameter
| Function | Specification |
| Measuring range | ION: 0~20000ppm |
| Resolution | 0.01(<1ppm); 0.1(<10ppm); other 1ppm |
| Accuracy | ±0.01ppm; ±0.1ppm; ±1ppm |
| Voltage input range | 0.0-1000.0mV |
| Temp. compensation | PT1000/NTC10K |
| Temp. range | -10~+130℃ |
| Temp. compensation range | -10~+130℃ |
| Temp. resolution | 0.1℃ |
| Temp. accuracy | ±0.2℃ |
| Ambient temperature range | 0~+70℃ |
| Storage temp. | -20~+70℃ |
| Input impedance | >10¹²Ω |
| Display | back light, dot matrix LCD display |
| Ior current output1 | isolated 4-20mA output, max. load 500Ω |
| Temp. current output2 | isolated 4-20mA output, max. load 500Ω |
| Current output accuracy | ±0.05mA |
| RS485 | Modbus RTU protocol |
| Baud rate | 9600/19200/38400 |
| Maximum relay contacts capacity | 5A/250VAC/5A/30VDC |
| One multi function relay | clean/periodic alarm/error alarm |
| Relay delay | 0~120 seconds |
| Data logging capacity | 500,000 |
| Language selection | English/traditional Chinese/simplified Chinese |
| Waterproof grade | IP65 |
| Power supply | 90-260VAC, power consumption < 7 Watts |
| Installation | panel/wall/pipe installation |
| Dimension | 144144120mm |
Ion selective sensor
| Parameter | Specification 1 | Specification 2 | Specification 3 |
| Thread | G3/4, NPT3/4 | M39*1.5 | G3/4, G1 |
| Shell material | PPS | ABS | PC, stainless steel |
| Cable length | 5m or customize | 5m or customize | 5m or customize |
| Install | immersion type | flow through type | immersion type |
Sensor specification
| Ion | Measure range | pH range | Accuracy | Sensor type | Temp range | Pressure |
| Ammonium NH4 | 1-18000ppm | 4-10pH | ±5%FS | PVC membrane | 0-50℃ | 0-1bar |
| Nitrate NO3 | 0.1-14000ppm | 2.5-11pH | ±5%FS | PVC membrane | 0-50℃ | 0-1bar |
| Fluoride F | 0.1-1900ppm | 5-7pH | ±5%FS | solid state | 0-50℃ | 0-1bar |
| CHloride Cl | 1.8-35500ppm | 2-12pH | ±5%FS | solic state | 0-50℃ | 0-1bar |
| Calcium Ca | 0.2-40000ppm | 4-10pH | ±5%FS | PVC membrane | 0-50℃ | 0-1bar |
| Copper Cu | 0.064-6400ppm | 2-6pH | ±5%FS | solid state | 0-50℃ | 0-1bar |
| Sodium Na | 0.1-23000ppm | >9pH | ±5%FS | glass | 0-50℃ | 0-1bar |
| Potassium K | 0.04-39000ppm | 2-12pH | ±5%FS | PVC membrane | 0-50℃ | 0-1bar |
| Lead Pb | 0.2-20700ppm | 4-7pH | ±5%FS | solic state | 0-50℃ | 0-1bar |
| Iodide I | 0.0064-5000ppm | 0-14pH | ±5%FS | solic state | 0-50℃ | 0-1bar |
product details
b1 (7)
b2 (7)
b3 (7)
b4 (7)
c1 (5)
c2 (5)
c3 (4)
c4 (4)
c5 (4)
c6 (4)
c7 (2)
c8 (2)
c9 (2)
Ion selective controller and sensor Application
Aquaculture, surface water, groundwater, source water, sewage treatment, river water, river course, ocean
b1 (11)
b2 (11)
b3 (12)
b4 (12)
b5 (10)
b6 (9)
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Related Products
Hebei JIRS Import & Export Co., Ltd., we specialize in providing top-notch water quality analyzers and sensors that meet the diverse needs of our clients.
Contact: Sunnie Lee
Tel: +86 13784354125
Email: info@jirswateranalyzer.com
WhatsApp: +86 13784354125
Company Address: No.188, Fengshou Road, Chang'an district, Shijiazhuang City, Hebei China 050041